ȸ  (Circulating  Water  Channel)

 

 - One complete vertical type C.W.C for resistance test, propeller open test and

   oblique, self propulsion test.
-This system is a creative idea that the divided  C.W.C system passing through the
  surface layer suction duct and the discharge duct of side wall adopted for the purpose
  of getting a uniform water at the observation section.

 

                                                                                             

 

 

 

 

 

 

     

                                 HW51A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                    HW51

 

Model

Spec.

HW51

HW51A

HW51B

Dimension

Test Section

Velocity

Motor

Surface Flow

Acc. Device

Vacuum Pump

Power

0.8(W)×1.02(H)×2.0(L)m

0.3(W)×0.2(H)×0.7(L)m

0.8m/sec. (Max.)

2.1Kw, AC Induction motor

 

 

1/2HP

AC 220V/60Hz, 3phase

1.0(W)×2.2(H)×5.3(L)m

0.5(W)×0.4(H)×1.5(L)m

1.0m/sec. (Max.)

11Kw, AC Induction motor

DC Motor, 1HP

150mm, PVC

1/2HP×2 sets

AC 220V/60Hz, 3phase

1.6(W)×4.52(H)×11.0(L)m

1.0(W)×0.8(H)×3.0(L)m

1.5m/sec. (Max.)

11Kw×2 sets

DC Motor, 1HP

200mm, PVC

1HP, 1/2×2 sets

AC 220V/60Hz, 3phase

Resistance Dynamometer, Propeller open test device, 36 Component balance

Guiding arm, Velocity meter, Traverse system, A/D Board & Data Acquisition System etc...

 

          square02_darkbluegreen.gif  Tel: 0505-453-4594   

E-mail : wookyungse@paran.com

       

            http://www.hangilco.com